Roder HTS  

Large Tents - GZ2000/240/860/H

GZ2000/240/860/H

Profiles & Connections

Optional accessories

  • ABS walling system
  • Bar tensioning
  • Entrance porches
  • Glass walling system
  • High peak roof conversions
  • Lean-to-units
  • Lighting
  • Linings
  • Portal beams
  • Ramp units
  • Single & double door units
  • ½ Hexagonal end bays
  • ½ Octagonal end bays
  

Frame Specifications

Span width: 20.00m
Eave height: 2.40m
Ridge height: 0m
Bay spacing: 5.00m
Roof pitch: 18°
Longest component: 10.70m
Wind loading: 102km/hr (0.50kN/m2)
Minimum tent length: 20.00m
Max tent length: No Limit

Material Specifications

Aluminium (framework) Hard pressed extruded aluminium
PVC covering White - high gloss PVC, flame retardant according to DIN 4102 B1, M2; B.S. 5438/7837; USA NFPA 701
Steel (connections) European - hot dipped galvanised to DIN 50976

Profiles & Connections

Upright/Truss: 220/100/4mm (4-channel) or 225/101/3.5/5.5mm (4-channel)
Eave purlin: 130/70/3mm
Intermediate purlin: 60/60/3mm
Ridge purlin: 130/70/3mm
Eave connection: Aluminium sliding
Standard Anchoring: 800mm Ground stakes

Flooring Systems

  • System 1:
    Cassette flooring system
  • System 2:
    Galvanised steel sub-frame with pressure treated wooden floorboards
  • System 3:
    Ring beam cassette flooring system
  • System 4:
    Timber sub-frame with pressure treated wooden floorboards
  • System 5:
    Weighted cassette flooring system

 

Legal notice: copyright 2006 © RÖDER HTS HÖCKER GmbH - All rights reserved - www.hockerhts.com